Wireless Communication & DSP
Friday, May 20, 2016
Machine-to-machine communication
›
Machine-to-machine communication, or M2M, is exactly as it sounds: two machines “communicating,” or exchanging data, without human interfa...
Wednesday, January 29, 2014
LTE UE Procedure
›
i) UE is Off ii) Power On UE iii) < Frequency Search > iv) < Cell Search > : Normally a UE would find multiple cells in ...
LTE Cell Search - Synchronization Procedure
›
UE searches in all centre frequencies Primary synchronization Signal(PSS) achieve subframe, slot and symbol synchronisation in ...
Tuesday, January 28, 2014
DSP Code Optimization Techniques for Speed
›
Code can be optimized for Speed or memory. Here I am discussing the methods for optimization for speed Optimization can can be done at d...
2 comments:
Thursday, January 23, 2014
Why Special Subframe is needed in LTE
›
As the single frequency block is shared in time domain between UL and DL the transmission in TDD is not continuous. All UL transmission nee...
Thursday, September 19, 2013
Why Special Subframe is required in LTE?
›
In LTE Frame Type 2 (TD-LTE) there is a special sub-frame when switching from DL to UL but there is no special sub-frame or gap when sw...
Thursday, July 11, 2013
3GPP LTE : Valid numbers of allocated Resource blocks in UL (Uplink)
›
Total number of allocated resource block for a user can only be any of these. 0 1 2 3 4 5 6 8 9 10 12 15 16 18 20 24 25 ...
›
Home
View web version